Epson RX580 - Stylus Photo Color Inkjet, Руководство по обслуживанию

Страница: 53 / 107

EPSON Stylus PHOTO RX560/580/590 Revision A
Disassembly and Assembly Removal of Exterior Parts 53
10. Remove the screws (x3) securing the Printhead. (Fig. 4-32)
11. Lift the Printhead, and disconnect the FFCs (x2). (Fig. 4-33)
Figure 4-32. Removing the Printhead
Figure 4-33. Releasing the Head FFCs
„
See Page 68 for how to remove the cartridge cover.
„
Connect the FFC with attention paid to the terminal surface.
„
When installing the Printhead, tighten the screws in the specified
order.
(Fig. 4-32)
„
Install the Head FFC Cover and Head Cable Cover as shown
below.
A D J U S T M E N T
R E Q U I R E D
For replacing the Printhead, note down the head ID before
installing the Printhead. After reassembly, refer to the following
section and perform the necessary adjustments:
„
5.1.1 Adjustment by Use of Adjustment Program (p.74)
Head FFC Cover
The bottom projections (x2) and the
top sliding parts (x2) must be in
alignment. Head Cable Cover
Engage the projection in the rear with
the carriage first and then fit the cover
onto the top projections (x2).
Head ID
C.B.P-TITE 2.6x8
Torque : 0.4±0.1N · m
3
Printhead
2 1
Do not touch nozzle surface
Head FFC