Epson RX580 - Stylus Photo Color Inkjet, Руководство по обслуживанию

Страница: 51 / 107

EPSON Stylus PHOTO RX560/580/590 Revision A
Disassembly and Assembly Removal of Exterior Parts 51
4.2.6 Waste Ink Tray Assy
1. Remove the Panel Assy (p.42)
2. Remove the Scanner Unit (p.44)
3. Remove the Middle Housing (p.48)
4. Remove the Waste Ink Tube from the Waste Ink Tray Assy. (Fig. 4-28)
Figure 4-28. Removing the Waste Ink Tray Assy
Figure 4-29. Notes on Installation of the Waste Ink Tray Assy
C A U T I O N
When removing the Waste Ink Tray Assy, take due care not to
stain any surrounding objects with waste ink.
„
When connecting the Waste Ink Tube, wipe the ink, if any, off
the joint area of the tube. With ink left adhering to the joint
area, the tube cannot be connected firmly and thus may easily
come off.
In addition, the tube, which is to be routed with the red line
always facing up, must be connected with care that the tube is
free from distortion.
„
Route the Waste Ink Tube with the red line always facing up so
that the tube is free from distortion. And with the tube passed
through the hook as shown in the figure, install the Waste Ink
Tray Assy.
(Fig. 4-29)
A D J U S T M E N T
R E Q U I R E D
On the occasion of replacing a part with a new one, replace all the
specified parts with new ones and clear the counter value after
assembly.
„
5.1.1 Adjustment by Use of Adjustment Program (p.74)
Waste Ink Tray Assy
Waste Ink Tube (to the I/S Assy)
Always with red line facing up
Pass the tube
through this hook
Do not pass the tube
through this hook
NG
Route here