Epson RX580 - Stylus Photo Color Inkjet, Руководство по обслуживанию

Страница: 43 / 107

EPSON Stylus PHOTO RX560/580/590 Revision A
Disassembly and Assembly Removal of Exterior Parts 43
4.2.2 Disassembly of Panel Assy
1. Remove the Panel Assy (p.42)
2. Remove the screws (x6) securing the Shield Plate, Panel Board and Ground Plate,
and remove the Shield Plate upward.
(Fig. 4-4)
3. Release the hooks, and remove the Panel Board. (Fig. 4-5)
4. Remove the screws (x2), and remove the LCD Module. (Fig. 4-6)
Figure 4-4. Removing the Screws (Shield Plate)
Figure 4-5. Removing the Panel Board
Figure 4-6. Removing the LCD Module
C A U T I O N
Take great care that the LCD surface is kept free from scratches
or dust and dirt.
In installation, make sure that the inside of the LCD Cover is free
from dust and dirt.
„
Tighten the screws for the LCD Module in the order specified.
(Fig. 4-6)
„
Install the Shield Plate under the board-to-board cable.
„
When installing the Shield Plate, tighten the screws in the order
specified.
(Fig. 4-4)
„
After installing the Shield Plate, press each of the buttons and
check that a click is felt.
C.B.P-TITE 3x8 (x5)
Torque : 0.6±0.1N
·
m
C.B.P-TITE 3x10
Torque : 0.6±0.01N
·
m
2
1
3
4
5
6
Ground Plate
Shield Plate
Hook (x2)
C.B.P-TITE 2x8 (x2)
Torque : 0.4±0.1N · m
LCD Module
Ground Plate
2
1