142
Power light
Status light
Lamp light Temp light
Status and solution
Off
Flashing blue
Orange
Off
Lamp has a problem
• Check the Lamp Hours in the
Info
menu to see if the lamp is burned
out. Unplug the projector, wait for
the lamp to cool down, and check if
it is broken or installed incorrectly;
reseat or replace the lamp as
necessary
• Clean or replace the air filter
• Make sure the lamp cover is closed
• If operating the projector at high
altitude, turn on
High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
Blue
Varies
Flashing
orange
Off
Replace the lamp soon to avoid
damage; do not continue using the
projector
Off
Flashing blue
Off
Flashing
orange
A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Off
Flashing blue
Flashing
orange
Flashing
orange
Auto Iris or Cinema Filter error; turn
the projector off, unplug it, and
contact Epson for help
Off
Flashing blue
Orange
Orange
Power error; turn the projector off,
unplug it, and contact Epson for help
Off
Flashing blue
Flashing
orange
Off
Internal projector error; turn the
projector off, unplug it, and contact
Epson for help
Note:
If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Содержание Pro Cinema 4050
