Epson PowerLite Pro G5900, Руководство пользователя

Страница: 60 / 140

60
Using the Projector on a Network
Using a Browser to Control the Projector
You can use a standard web browser to monitor and control the
projector through the network.
1. Make sure that the projector is set up for your network, as
described on page 54.
2. Open your web browser and enter the IP address of the projector
you want to monitor in the browser window.
If you’re not sure what the address of the projector is, turn the
projector on and select
Wired LAN
from the Network menu to
display the IP address of the projector. Do not enter leading
zeroes.
3. Press
Enter
, or, if you set a Web control password in the
projector’s Network menu, enter the user name
EPSONWEB
and your password, then press
Enter
.
4. Select one of the menu options listed on the screen, then change
any of the settings as needed. These settings correspond to those
found in the projector’s menu system.
You cannot change the following settings using a web browser:
■
Quick Corner
,
Pointer Shape, Test Pattern,
or
User
Button
in the Settings menu
■ User’s Logo
,
High Altitude Mode
,
BNC Sync
Termination
,
Remote Control Type
, and
Language
in
the Extended menu
■
Any settings in the Reset menu
■
Any settings related to the
Power On Protect
,
User’s
Logo Protect
, or
Network Protect
passwords
You can only change the following settings using a web browser:
■
Community Name
■
Monitor password
note
When using a browser to
access the projector, you
cannot connect through a
proxy server.
Standby Mode in the
Extended menu should be
set to
Communication On
to monitor the projector in
standby mode.