Power light
Status light
Lamp light
Temp light
Status and solution
Off
Flashing blue
Off
Orange
Projector has overheated and
turned off. Leave it turned off to
cool down. Once the Temp and
Status lights turn off and the power
light turns blue (after about five
minutes), try the suggestions
below:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on
High Altitude
Mode
.
• If the problem persists, unplug
the projector and contact Epson
for help.
Off
Flashing blue
Orange
Off
Lamp has a problem.
• Check to see if the lamp is
burned out, broken, or installed
incorrectly. Reseat or replace the
lamp as necessary.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on
High Altitude
Mode
.
• If the problem persists, unplug
the projector and contact Epson
for help.
Flashing blue
Light status
Flashing
Light status
Replace the lamp soon to avoid
varies
orange
varies
damage. Do not continue using the
projector.
131
Содержание PowerLite 1222
