Passbook
When you use single sheet or passbook, set this option to
On
. When you use multipart forms, set this
option to
Off
.
Binding
You need to set the method for binding when you use a passbook. Select
Horizontal
for a
horizontal-fold passbook or
Vertical
for a vertical-fold passbook.
Thin paper
When you use thin paper, set this option to
On
. This mode is activated when you select
On
and the
Passbook
mode is set to
Off
.
Buzzer
If you set this feature to
On
, the printer beeps when an error occurs. See “Using the Error Indicators”
on page 72 for more information on printer errors. If you do not want the printer to beep, select
Off
.
Paper width measurement
You can set the timing when the printer measures the width of the paper. When you select
After
loading
, the printer measures the width just after it loads the paper. When you select
Before
printing
, it makes the measurement just before printing the first line.
Right paper edge detection
This setting allows you to determine whether the printer prints excess data when the data is longer
than the paper width. When you select
On
, the excess data is not printed. When you select
Off
, the
printer prints the excess data on the next line.
Low-noise mode
When this mode is set to
On
, the noise is reduced, but the printing speed is slower.
Broken pin compensation
When this feature is
On
, printing is done at normal quality if one of the 24 pins is broken. You need to
set the broken pin number at the
Broken pin number
setting.
PLQ-30/PLQ-30M User’s Guide
Control Panel
57
Содержание PLQ-30
Страница 1: ...User s Guide NPD5346 00 EN ...
Страница 15: ...Chapter 1 Paper Handling PLQ 30 PLQ 30M User s Guide Paper Handling 15 ...
Страница 114: ...Degree of passbook A Less than 0 3 mm B R2 5 mm C Less than 0 3 mm PLQ 30 PLQ 30M User s Guide Product Information 114 ...
Страница 139: ...W Wincor Nixdorf mode settings 62 PLQ 30 PLQ 30M User s Guide Index 139 ...
