Epson LabelWorks LW-PX700 Скачать руководство пользователя страница 6

Страница: 6 / 58

Frame and Table Lists

Troubleshooting

Messages

This section explains the remedies when the following messages

appear on the display.

Check battery

Charge Li-ion!

The battery runs out of power. Connect the AC

adapter to the printer and charge the battery.

For details,

"Charging the Li-ion battery"

Check battery

Change alkaline

The batteries run out. Turn off the power and

replace all batteries with new ones.

Cover open!

Top cover is open. Close the top cover.

Insert tape

Check if the tape cartridge is loaded or correctly

set.

For details,

"Installing a tape cartridge"

Check tape

cartridge

The loaded tape is not supported. Insert a correct

cartridge.

No more

sequence No.!

Only up to 2 sequence numbers can be inserted.

No more barcode! Only up to 2 barcodes can be inserted.
QR CODE too big! Perform either of the following:

Use a wider tape. Reduce the text or cell size.

Lower "ECC Level".

Overheated!

The printhead is overheated. Turn off the power

and remove the tape cartridge, then leave the

printer until it cools down.

Trash at slot

Remove trash

Tape remains in the tape eject slot. Remove the

tape.

Remove cut tape Unable to start printing because cut tape remains

in the tape eject slot. Remove the tape from the

tape eject slot.

Problem

Unable to charge Li-ion battery

Is the Li-ion battery correctly installed?

Check that the Li-ion battery is correctly installed.
Is the AC adapter securely connected?

Connect the AC adapter and the power cable firmly to the power

socket of the printer, the AC adapter connector and the outlet.

Unable to detect the tape correctly

Is the tape cartridge correctly installed?

Check that the tape cartridge is correctly installed.
Is the label for detecting the tape cartridge clean?

If not, wipe the dirt off with a soft cloth.
Is the detection sensor of the printer clean?

If not, wipe the dirt off with a soft cloth.

MEMO

If none of the above has solved the problem or the symptom is

other than the above, contact the K-Sun customer support center.

Содержание LabelWorks LW-PX700



























































Результаты поиска

Содержание LabelWorks LW-PX700

Отзывы:

Похожие инструкции для LabelWorks LW-PX700

Бренды по названию

Популярные бренды

Epson LabelWorks LW-PX700, Руководство пользователя

Результаты поиска

Содержание LabelWorks LW-PX700

Отзывы:

Похожие инструкции для LabelWorks LW-PX700

Бренды по названию

Популярные бренды