Epson Fast T-Jet 3 PLUS, Руководство пользователя

Страница: 58 / 135

T-Jet3 PLUS User’s Manual
Version 1.1 Revised July, 2008
48
Because Underbasing is such a crucial part of image quality, we recommend
you familiarize yourself with the different Print Modes to get better understanding
of the uses for each one.
For a complete list of the various CMYK, Eight Color and Underbase Print Modes
available, please refer to Chapter 7 of your FastARTIST User’s Manual.
When A Printing Job is Finished
After your T-Jet3 PLUS fi nishes printing, 1.
the Print Bed will eject from the unit
(ensure the Bed is in the Eject 2 position
by pressing the Eject button again).
For brighter prints, double print the
image by pressing the Load button
and printing from the application a
second time. For higher production,
set the number of Pages to print to a
high quantity or choose a 2-pass Print
Mode.
Keep in mind, if you tell the application to print dozens of copies, FastRIP
might build a very large print fi le that will slow down your computer.
2. Carefully remove the shirt from the Shirtboard for curing.
3. Finished prints must be heat cured to fully set the ink. Use a conveyor dryer or
a Heat Press.
Curing Your Garments
Finished prints must be heat cured to fully set the ink. Use a conveyor dryer or a
Heat Press with the following settings:
Light Garments
(With or without using FastBRIGHT)
Cure Time: Approximately 60-90 seconds
with medium to heavy pressure.
Cure Temp: 330°F (166°C)
C Cuurriinng g Y Yo ouurr G Ga arrm me ennttss
Fi Fini nish shed ed p prirint ntss mu must st b be e he heat at c cur ured ed tto o fu fullllyy se sett th the e in inkk U Use se a a c con onve veyo yorr dr drye yerr or or a a