Epson F6070, Руководство пользователя

Страница: 42 / 111

Basic Operations 42
Paper Feed Adjust
If the paper feed amount is not set correctly, banding (horizontal band patterns or
discoloration) may occur. If the banding is not resolved after head cleaning or Head
Alignment is performed, adjust the amount of paper feed correction. This value can be set
in either of the following two ways:
O
Pattern
Visually check the printed pattern and enter the correction value.
O
Value
Change the value based on the banding observed. The correction value is set as the
ratio in relation to 1 meter (-0.70 to +0.70%).
Printing an Alignment Pattern for Correction
1. Select Custom Paper Setting from the paper menu.
2. Press the
d
/
u
buttons to select the bank where you want to save the custom paper
settings, then press the
Z
button.
3. Press the
d
/
u
buttons to highlight Paper Feed Adjust and press the
Z
button.
4. Select Pattern , and then press the
Z
button.
5. Press the
Z
button to print an adjustment pattern.
6. Using a ruler that shows millimeters, measure the distances between the “+” symbols
in the printed adjustment pattern.
Use only the distance between the center symbols or the average of the distances between
the left, center, and right symbols.
7. Press the
d
/
u
buttons to enter the measured value and press the
Z
button to return
the printer to the ready-to-print state.