Epson F6070, Руководство пользователя

Страница: 21 / 111

Introduction 21
O
If you will not be using the printer for more than 2 weeks, maintenance must be
performed by a service engineer before and after this period. This maintenance work
will be charged.
Note that even if proper maintenance has been done before leaving the printer for a
long time, repair may be necessary when doing maintenance for reusing the printer,
depending on the period and conditions of storage. In such a case, the repair work will
also be charged.
O
The roller may leave an impression on paper that is left in the printer. This can also
cause wavy or curled paper resulting in paper feeding problems, or the print head could
be scratched. Remove any paper when storing or not using the printer.
O
Store the printer after confirming that the print head has been capped (the print head is
positioned at the far right). If the print head is left uncapped for a long time, the print
quality may decline.
O
To prevent the accumulation of dust and other foreign matter in the printer, close all
covers before placing it in storage.
If the printer will be not be used for an extended period, protect it with an anti-static cloth
or other cover.
The print head nozzles are very small, and they can become clogged easily if fine dust
gets on the print head, and you may not be able to print properly.
O
When turned on after an extended period of disuse, the printer may automatically
perform head cleaning to ensure print quality.
Head cleaning will end after about 10 to 15 minutes.
Notes on Handling Ink Packs and Ink Tanks
Note the following points when handling ink packs and ink tanks.
O
Do not remove the ink tanks.
Ink tanks are calibrated when installed. Removing them can harm quality and
functionality.
O
Store ink packs at room temperature out of direct sunlight.
Note:
If the print head is not capped, turn the printer on, and then turn it off.