Epson EU-m30 Series, Руководство разработчика

Страница: 63 / 85

56
Figure I.1
Figure I.2
Appendix I SETTING PAPER WIDTH
I.1 Notes

If changing the paper width from 80 mm {3.15"} to 58 mm {2.28"}, install the included roll paper guides for 58
mm {2.28"} paper width.

Be sure to set the paper width using software settings to align the print area. (For the setting method, see 3.5.2
(2).)
Note: After changing the paper width from 80 mm {3.15"} to 58 mm {2.28"}, while using 58 mm {2.28"}, you are
prohibited from changing the paper width again back to 80 mm {3.15"}.
(If using paper with a 58 mm {2.28"} width, part of the head will rub directly against the platen without any
paper, so the part of the head that rubbed against the platen may be damaged. Also, the section of the
cutter blade without paper may be dulled. Therefore, printing and auto-cutting cannot be done for the
expanded section of the paper width.)
I.2 Method for Installing 58 mm {2.28"} Roll Paper Guides
Step 1: Check that the printer's power is off, then open the roll paper cover.
Step 2: Align the three protrusions of the 58 mm {2.28"} width roll paper guide (marked as L SIDE) with the slits
on the Power button side of the printer, and insert them.