28
3.4
Indicators
3.4.1
Displayed color and icon
1: POWER LED (Blue)
2: ERROR LED (Orange)
3: Flashing LED (Blue)
3.4.2
Displayed patterns
(1)
Printer status icon
POWER
LED
ERROR
LED
Flashing
LED
Normal status
On
Off
On or [Off]*3
Initializing after power-on
On
On
On
Executing self-test
On
*1
Off
Continued self-test standby
On
Flashing - (1)
Off
Paper is being fed by the Feed button
On
*1
Off
Macro execution standby
On
Flashing - (1)
Off
Roll paper cover open when not
printing
On
On
Off
Paper-end
On
On
Off
Near-end
On
Flashing - (3)
*5
According to normal
status above
Errors that recover automatically
On
On
Off
Recoverable errors
On
On
Off
Unrecoverable errors
On
Flashing - (4)
Off
Updating firmware
Flashing - (1)
Off
Off
In firmware forced update mode
On
On
On
Power OFF in process
Flashing - (1)
On
Off
Power OFF standby *2
Flashing - (2)
Off
Off
Printing completed flashing
(Attention flashing)
On
*1
[Flashing - (5) *4 *5]
or Off *3
Flashing - (1): Repeats between on for 320 ms then off for 320 ms.
Flashing - (2): Repeats between on for 160 ms then off for 2,400 ms.
Flashing - (3): Repeats between on for 320 ms then off for 2240 ms.
Flashing - (4): Repeats between on for 480 ms then off for 160 ms.
Flashing - (5): Repeats between on for 640 ms then off for 640 ms.
*1
Depends on the paper sensor status. It is Off if there is paper, and On if there is no paper. Furthermore,
when a near-end is detected (if equipped with near-end sensor), the light is Flashing - (4), and when a near-
end is not detected, it depends on the paper sensor status.
*2
See Appendix D.2.
*3
Can select with the EU-m30 Utility. [ ]: Set when shipped.
*4
Flashing starts when print job is completed. Can select the flashing duration with the EU-m30 Utility.
When the flashing duration ends, the light turns Off.
If, however, a new print job is received during the preset duration and printing starts, the flashing stops at
3
3
2
1
Содержание EU-m30 Series
