Epson EPL-6000, Руководство пользователя

Страница: 48 / 219

Connecting to Your Computer
For the EPL-6000 to be able to receive and interpret information
from your computer, both devices need to be set up so that they can
communicate correctly. This requires having the correct interface
cable and selecting the right communications settings. You can
select from the following built-in interfaces:
l
Parallel
l
RS-232C serial
l
RS-422A serial.
Choosing an interface
When connecting the EPL-6000 to your computer, you first have to
determine whether a parallel or serial connection should be used.
Many computers only provide one type of connection for a printer.
If both serial and parallel connections are available, it is normally
better to use the parallel interface for the printer, leaving the serial
port of your computer free for devices such as modems. If you are in
any doubt about which type of connection to make, consult your
Epson dealer.
Your printer is set up at the factory for parallel communication. If
your computer also uses parallel communication, you should be
able to connect up immediately, provided you have a shielded
parallel interface cable.
However, if you find that you need a serial interface, you must
change the communications settings with SelecType as described in
Chapter 3. You also need to find out which type of serial interface is
required by your computer (RS-232C or RS-422A) and set the
printer’s DIP switches accordingly. (The DIP switches are factory set
for the RS-232C serial interface.)
Testing and Connecting Your Printer 2-11