manualshive.com logo in svg

Epson EPL-6000, Руководство пользователя

Поделиться
Скачать
Epson EPL-6000 Скачать руководство пользователя страница 41

Testing the Printer

3.

Take a stack of paper and fan it. Next, tap the edges of 

the 

paper

on a flat surface to even up the stack.

4.

Insert the stack of paper into the paper cassette, making sure
that the top of the stack does not cover the red line inside 

the

paper cassette. Push 

the 

paper in gently as far as it can go.

5.

Slide the paper guides together (if necessary) until they are both
resting lightly against the paper.

6.

Close the manual feed tray.

7.

Reinsert the paper cassette into the printer with the arrow on the
side of the cassette pointing into the printer. Push the cassette in
until it goes no 

further 

and lower the right side of the cassette

(the side you load paper into) until it drops into place.

CAUTION: 

It is particularly important to lower the

cassette into place. If the cassette is 

not 

installed properly,

the 

message PAPER EMPTY 

appears in the display.

2-4

Testing and Connecting Your Printer

Содержание EPL-6000




























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды