Epson EPI-4000, Руководство пользователя

Страница: 187 / 292

Paper Handling
Problem Solution
The printer prints a
page and then stops
(continued).
The display reads PS
(continued).
The paper size currently set in SelecType
may
not
match your paper size. If you
want to print on the paper anyway, press
ON LINE.
Your printer starts printing;
however, the printout may be incomplete
if the actual paper size is smaller than. the
SelecType paper size setting. To set the
correct paper size before you print again,
follow the steps below:
1.
Press MANUAL FEED to feed the paper;
then press ON LINE to set the printer
off line. If the
dP
(data processing)
message appears, press
RESET
until
the display reads rE; then press
ON LINE.
2.
Press
MANUAL FEED
to release the
paper. Then
change
the paper in the
paper tray to the size matching the
paper size set in SelecType.
If you would like to use the paper
already in the paper tray, you need to
change
the SelecType paper size setting.
Press SelecType to enter SelecType. Then
choose the correct paper size setting and
press SET to save your new setting. See
Chapter 2 to change SelecType settings.
Troubleshooting
6-33