Epson EMP-S4, Руководство по обслуживанию

Страница: 99 / 102

5-3
EMP-S4
SEIKO EPSON Revision:B
„
When the video source is Video type, the following screen is displayed.
5.1.2 Initializing (Resetting) the AS Menu Values
There are two levels of initialization that can be used to reset the projector usage history values
stored in EEPROM.
1. Clearing the Basic Lamp Information
While the AS menu is being displayed, simultaneously press the
[Source]
and
[ ]
keys for
10 seconds.
2. Clearing All the Lamp Information
While the AS menu is being displayed, simultaneously press the
[Source]
and
[ ]
keys for
10 seconds.
Item
Clearing the Lamp Informa-
tion
Clearing All the Lamp
Information
Total Operation Time No Change Reset to 0H
Lamp Operation Time Reset to 0H Reset to 0H
Lamp ON Reset to 1 Reset to 1
Lamp OFF Reset to 0 Reset to 0
Lamp Replacement
Add 1 to the
current value
Reset to 0
Fatal Error (3 items) No Change Reset to 0
C omputer C omputer
Video Signal Video Signal : ---- (No Signal ) : ---- (No Signal )
Total Operation Time Total Operation Time : 0 H : 0 H
Lamp Op. Time ( C ) Lamp Op. Time ( C ) : 0 H : 0 H
(H/M/L) (H/M/L) : 0 H / 0 H / 0 H : 0 H / 0 H / 0 H
Lamp Replacement Lamp Replacement : 0 Times : 0 Times
Lamp ON/LampOFF Lamp ON/LampOFF : 0 Times : 0 Times
C ool Down C ompleted C ool Down C ompleted : 0 Times : 0 Times
Fatal Error Fatal Error : T 0 L 0 I 0 : T 0 L 0 I 0
Destination Destination : XXXXXXXX : XXXXXXXX
Engine Type Engine Type : XXXXXXX : XXXXXXX
P P XXXXXXXXXXXXXXX XXXXXXXXXXXXXXX
O O ------------------ ------------------
J J XXXXXXXXXXXXXXX XXXXXXXXXXXXXXX
The last four digits show the PW
firmware version.
The last four digits show the Y43
firmware version.