Epson EMP Monitor, Руководство по эксплуатации

Страница: 7 / 37

•
Even after EMP Monitor has been uninstalled, the settings and log
information will remain on the hard disk. If this information is no
longer required, you may delete the EMP Monitor V4.30 folder.
Provided the default settings were used at installation, this folder can
be found at:"C:\Users\(User Name)\AppData\Local\VirtualStore\Program
Files\EPSON Projector\EMP Monitor V4.30"
Before starting operations
Check the following points before starting up EMP Monitor.
•
EMP Monitor must be installed on the computer to be used for
monitoring and control.
•
The computer and the projectors must be connected to the network.
•
If using Windows 2000/Windows NT4.0/Windows XP/Windows Vista,
the computer must be started up in Administrator mode.
•
Depending on the projector model, a commercially-available serial
W
TCP/IP conversion adapter and a connection cable are required in
order to use EMP Monitor.
s
Projector's User's Guide "Standby Mode"
Make the settings for the serial
W
TCP/IP conversion adapter before
connecting to the projector.
Operating environment
7