Epson EMP-821 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 109

background image

106

We

:EPSON AMERICA, INC.

Located at

:3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806

Tel

:562-290-5254

Declare under sole responsibility that the product identified herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed, is identical to the representative unit
tested and found to be compliant with the standards. Records maintained
continue to reflect the equipment being produced can be expected to be
within the variation accepted, due to quantity production and testing on a
statistical basis as required by 47CFR 2.909. Operation is subject to the
following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Trade Name

:EPSON

Type of Product

:Projector

Model

:EMP-821/81/61

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
or television reception. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
interference to radio and television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this device
and may cause interference levels which exceed the limits established by
the FCC for this equipment. It is the responsibility of the user to obtain and
use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables
connected to unused interfaces. Changes or modifications not expressly
approved by the manufacturer could void the user’s authority to operate
the equipment.

DECLARATION of CONFORMITY

According to 47CFR, Part 2 and 15

Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B

Personal Computers

«
...
105
106
107
108
109
»

Содержание EMP-821














































































































Отзывы:

Нет отзывов

Похожие инструкции для EMP-821

Бренд: Wells-Gardner Страницы: 25

Бренд: Flip File Displays Страницы: 4

COLOREDGE CG243W

Бренд: Eizo Страницы: 8

Бренд: Microlife Страницы: 32

Бренд: AG Neovo Страницы: 32

Бренд: Sencor Страницы: 14

Бренд: Summer Страницы: 4

Бренд: Arestech Страницы: 23

Бренд: Hisense Страницы: 33

Бренд: Newall Страницы: 49

Бренд: Mitsubishi Страницы: 55

Бренд: C&T Solution Страницы: 44

Бренд: AOC Страницы: 1

Бренд: LG Страницы: 45

Бренд: Mitsubishi Electric Страницы: 30

Бренд: Mitsubishi Electric Страницы: 2

Бренд: Mitsubishi Electric Страницы: 84

Бренд: Mitsubishi Electric Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды