Epson EMP-821, Руководство пользователя

Страница: 74 / 109

73
Problems Solving
Lamp replacement notification Replace the lamp with a new one.
s
p.86
If you continue to use the lamp after it has passed the replacement period, the possibility that the
lamp may break will increase. Replace the lamp with a new one as soon as possible. The Power
indicator status will vary depending on the projector status at the time.
Power indicator lights green or orange/flashes green or orange
: lit : flashing : off
Status Cause Remedy or Status
Standby condition Projection starts again when the [Power] button is pressed.
You can disconnect the power plug from the electrical outlet when the status light is in this
condition.
Warm-up in progress Warm-up time is approximately 40 seconds. After warm-up is complete, the indicator stops
flashing.
Projection in progress
Cool-down in progress Please wait.
•The cool-down
g
period lasts about 20 seconds.
•The [Power] button will not operate if it is pressed while cool-down is in progress. When the
cool-down period is finished and the confirmation buzzer has sounded and the indicator changes
to light orange, repeat the operation.
: lit : flashing : off
Status Cause Remedy or Status
Orange
Power
Normal
Orange Power
Green Power
Green Power
Orenge Power
TIP
• If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No Help"
on the following page.
• If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided in the
"International Warranty Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet.