Basic Operations
27
Adjusting the Projected Image
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of connecting video equipment.
Press the
button on the remote control to display the test pattern. The standard for horizontal lines
at the top and bottom uses 2.40:1 CinemaScope.
Press the
button again to end the test pattern display.
Lens Adjustment Function (Focus, Zoom, Lens Shift)
To adjust the focus, zoom, or lens shift, press the
button on the remote control or the
button on
the control panel, and then select the item you want to adjust.
Remote control
Control panel
The adjustment items switch as shown in the following table.
1
Focus adjustment
Adjust Focus
is displayed on the screen.
Adjusts the focus of the projected image.
s
2
Zoom adjustment
Adjust Zoom
is displayed on the screen.
Adjusts the size of the projected image.
s
3
Lens shift adjustment
Adjust Lens Shift
is displayed on the screen.
Adjusts the position of the projected image.
s
To finish making adjustments, press the
button in Lens shift adjustment.
c
You can register the results of lens adjustment to the memory (Save Lens Position). You can load the
lens position that you registered from the remote control or the Configuration menu.
