Epson EH-TW6600 Скачать руководство пользователя страница 120 | Manualshive

Страница: 120 / 123

background image

Appendix

119

General Notes

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting from the use of the infor‐
mation contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties
for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse,
or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options
or any consumable products other than those designated as Original Epson Products or Epson Approved Prod‐
ucts by Seiko Epson Corporation.

The contents of this guide may be changed or updated without further notice.

Illustrations in this guide and the actual projector may differ.

Restriction of Use

When this product is used for applications requiring high reliability/safety such as transportation devices related
to aviation, rail, marine, automotive etc.; disaster prevention devices; various safety devices etc; or functional/
precision devices etc, you should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. Because this product was not
intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main
communication equipment, nuclear power control equipment, or medical equipment related to direct medical
care etc, please make your own judgment on this product’s suitability after a full evaluation.

General Notice

EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their logos are registered trademarks or
trademarks of Seiko Epson Corporation.

HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing
LLC.

WirelessHD, WiHD, and the WiHD logo are trademarks or registered trademarks of WirelessHD LLC.

InstaPrevue and the InstaPrevue logo are the trademarks or registered trademarks of Silicon Image, Inc.

Bluetooth

®

and the Bluetooth logo are the trademarks of Bluetooth SIG, Inc.

MHL and the MHL logo are a trademark, registered trademark or service mark of MHL, LLC in the United States
and/or other countries.

WPA

™

and WPA2

™

are registered trademarks of Wi-Fi Allience.

App Store is a service mark of Apple Inc.

Google Play is a trademark of Google Inc.

All other trademarks are the property of their respective owners and used for identification purpose only.

©SEIKO EPSON CORPORATION 2014. All rights reserved.

«
...
118
119
120
121
122
...
»

Содержание EH-TW6600




























































































































Отзывы:

Нет отзывов

Похожие инструкции для EH-TW6600

Passport 500 Pro

Бренд: Fender Страницы: 4

JBL BAR 5.1 SURROUND

Бренд: Harman Страницы: 4

Бренд: Harman Страницы: 48

Infinity KAPPA 4100msb

Бренд: Harman Страницы: 8

JBL CINEMA SB190

Бренд: Harman Страницы: 19

JBL BAR 5.0 MULTIBEAM

Бренд: Harman Страницы: 25

Бренд: JBL Страницы: 2

Simply Cinema ESC333

Бренд: JBL Страницы: 16

Project K2.S5500

Бренд: JBL Страницы: 2

Бренд: JBL Страницы: 8

Бренд: JBL Страницы: 2

Authentics L 16

Бренд: JBL Страницы: 11

OCTOPUS Multi-Room

Бренд: Opus Technologies Страницы: 12

AlwaysFresh HFC-1000

Бренд: Waterline Technology Страницы: 6

Varixx UMS 4401 SPCD

Бренд: Grundig Страницы: 47

Бренд: POBEL Страницы: 9

Бренд: Bowers & Wilkins Страницы: 1

AQUA OCEAN AQ4000

Бренд: ICA Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды