background image

Images  appear  dark

Check

Remedy

Is the image brightness set correctly?

Adjust the 

Brightness

 and 

Power Consumption

 settings from the Configuration menu.

s

 

Image

 - 

Brightness

 

p.77

s

 

Settings

 - 

Power Consumption

 

p.80

Is the contrast

g

 adjusted correctly?

Adjust the 

Contrast

 setting from the Configuration menu.

s

 

Image

 - 

Contrast

 

p.77

Is it time to replace the lamp?

When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.

s

 "Replacing the Lamp" 

p.112

Problems when Projection Starts

The  projector  does  not  turn  on

Check

Remedy

Did you press the [

t

] button?

Press the [

t

] button to turn the power on.

Are the indicators switched off?

The power cable is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cable.

s

 "From Installation to Projection" 

p.30

Check that your electrical outlet or power source is functioning correctly.

Do the indicators turn on and off when the power cable is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this

does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.

s

 

Epson Projector Contact List

Is the 

Control Panel Lock

 set to 

Full Lock

?

Press the [

t

] button on the remote control. If you do not want to use 

Control Panel Lock

, change the setting to 

Off

.

s

 

Settings

 - 

Control Panel Lock

 

p.80

Is the correct setting for the remote receiver selected?

Check the 

Remote Receiver

 from the Configuration menu.

s

 

Settings

 - 

Remote Receiver

 

p.80

Problem Solving

104

Содержание EB-900































































































































































Отзывы: