Epson EB-900, Руководство пользователя

Страница: 86 / 158

Submenu Function
Connection
Mode
Set the connection mode when using EasyMP Network
Projection to connect the projector and computer.
This is set to
Quick by default.
See the following manual for details on connection mode.
s
EasyMP Network Projection Operation Guide
Channel (This can only be set if Connection Mode is set to Quick .)
Select the frequency band used by the wireless LAN from 1ch ,
6ch , or 11ch .
This is set to 11ch by default.
Wireless LAN
Sys.
Set the Wireless LAN system to either
802.11b/g
or
802.11b/g/n
.
The default value is
802.11b/g/n
.
SSID Auto Set‐
ting
(This can only be set if
Connection Mode
is set to
Quick
.)
Set to
On
to speed up the projector search.
Set to
Off
when connecting to multiple projectors at the same
time.
This is set to
On
by default.
SSID
(This can be set only if
SSID Auto Setting
is set to
Off
.)
Enter an SSID
g
. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
Submenu Function
IP Settings
(This can only be set if Connection Mode is set to Advanced .)
You can make network settings.
DHCP : Set to On to make network settings using DHCP
g
. If this
is set to On , you cannot set any more addresses.
IP Address : You can input the IP address
g
assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask : You can input the subnet mask
g
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address : You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display To prevent the SSID
g
from being displayed on the LAN Standby
screen, set this to Off .
IP Address Dis‐
play
To prevent the IP address
g
from being displayed on the LAN
Standby screen, set this to
Off
.
List of Functions
86