Epson EB-900, Руководство пользователя

Страница: 32 / 158

Switching to the Target Image by Remote Control
You can change directly to the target image by pressing the following
buttons on the remote control.
Remote control
A
Each time the button is pressed, it cycles through the following images:
•
Computer1 port
•
Computer2 port
B
Each time the button is pressed, it cycles through the following images:
•
S-Video port
•
Video port
•
HDMI port
C
Each time the button is pressed, it cycles through the following images:
•
USB Display
•
Images from the device connected to the USB(TypeA) port
D
Changes to the image projected with EasyMP Network Projection. When
projecting using the optional Quick Wireless Connection USB Key, this
button switches to that image.
Projecting with USB Display
You can use the commercially available USB cable to connect the projector
to a computer to project images from the computer.
To start USB Display, set USB Type B to USB Display from the
Configuration menu.
s
Extended - USB Type B p.81
System requirements
For Windows
OS
Windows 2000 Service Pack 4
The following 32 bit operating systems:
Windows XP
Windows XP Service Pack 2 or later
Windows Vista
Windows Vista Service Pack 1 or later
Windows 7
The following 64 bit operating systems:
Windows 7
CPU
Mobile Pentium III 1.2 GHz or faster
Recommended: Pentium M 1.6 GHz or faster
Amount of
Memory
256 MB or more
Recommended: 512 MB or more
Hard Disk
Space
20 MB or more
Display
Resolution of no less than 640x480 and no higher than
1600x1200.
Display color in 16-bit color or greater
Projecting Images
32