Epson EB-900, Руководство пользователя

Страница: 80 / 158

Settings Menu
Submenu Function
Keystone
You can correct keystone distortion.
•
When H/V-Keystone is selected:
•
Correcting manually
Adjust
V-Keystone and H-Keystone to correct
horizontal and vertical keystone distortion.
•
Correcting automatically
Set
Auto V-Keystone to On .
(This item cannot be selected if Projection is set to
Front/Ceiling, Rear, or Rear/Ceiling.)
s
"Correcting automatically (Auto V-Keystone)" p.36
•
When Quick Corner is selected:
Select and correct the four corners of the projected image.
s
"Correcting manually (Quick Corner)" p.37
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s
"Restricting Operation (Control Panel Lock)" p.61
Submenu Function
Pointer Shape
You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s
"Pointer Function (Pointer)" p.52
Power Consump‐
tion You can set the lamp brightness to one of two settings.
Select
ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When
ECO is selected, the power consumption and the lamp's
operating life are changed as follows, and fan rotation noise
during projection is reduced.
Electrical consumption: about 20% decrease, lamp life: about 1.2
times longer
Volume
You can adjust the volume. Setting values are saved for each
source.
Mic Input Level
Adjust this if the microphone input level is low and the
microphone audio output from the projector's speaker is difficult
to hear, or if the input level is too high, resulting in a crackling
sound in audio from the microphone. When
Mic Input Level
is
turned down to 0, no microphone audio is output from the
speaker.
Remote Receiver
You can limit the reception of the operation signal from the
remote control.
When set to
Off , you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control or
the control panel for at least 15 seconds to reset the setting to its
default value.
List of Functions
80