Epson EB-4550, Руководство по установке

Страница: 39 / 91

a
•
Make the following settings to output image and audio even when the projector is in standby mode.
Set
Standby Mode to Communication On .
Press [Menu] button > Extended > Standby Mode
Set A/V Output to Always On .
Press [Menu] button > Extended > A/V Settings > A/V Output
•
Only analog RGB signals being input to the Computer port or the BNC port can be output to an external monitor.
•
When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external
output.
Connecting a LAN Cable
Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
By connecting a computer to the projector over a network, you can project images and check the status of the projector.
LAN
a
•
To prevent malfunctions, use a category 5 or higher shielded LAN cable.
•
You need to connect a LAN cable to update software using "EasyMP Network Updater".
Connecting Equipment
39