Adjusting the Horizontal Tilt (When Setup on a
Desk)
Extend and retract the rear feet to adjust the projector's horizontal tilt.
A
Extend the rear foot.
B
Retract the rear foot.
Attention
The rear feet can be attached and removed. Note that the feet will detach if
they are extended more than 10 mm.
Screen Settings
Set the Screen Type to
4:3
,
16:9
, or
16:10
according to the aspect ratio of
the screen being used
Press [Menu] button >
Extended
>
Display
>
Screen
>
Screen Type
The area where the image is displayed matches the shape of the screen.
a
The default values are shown below.
EB-G6350/EB-G6150:
4:3
Other projectors:
16:10
You do not need to set the
Screen Type
when the default value is the
same as the aspect ratio for the screen being used.
Adjusting the position of the image on the projected screen
You can adjust the position of the image if there are margins between the
edge of the image and the projected screen frame due to the Screen Type
setting.
Press [Menu] button >
Extended
>
Display
>
Screen
>
Screen Position
Example: When the
Screen Type
is set to
4:3
for EB-G6750WU
You can move the image to the left and right.
a
The
Screen Position
cannot be adjusted in the following situations.
•
If the
Screen Type
is set to
16:10
when using EB-G6750WU/EB-
G6650WU/EB-G6550WU/EB-G6450WU/EB-G6250W/EB-G6050W
•
If the
Screen Type
is set to
4:3
when using EB-G6350/EB-G6150
Installing the Projector
25
Содержание EB-4550
Страница 1: ...Installation Guide ...
Страница 5: ...Main Guide ...
