Labels
When selecting labels for printing, always choose labels mounted on continuous backing sheets with
sprocket holes for use with a tractor. Do not use labels on shiny single sheet backing, because the
backing sheet tends to slip and may not feed properly.
Follow these steps to load labels:
!
Caution:
Use labels only under normal operating conditions because labels are especially sensitive to
temperature and humidity.
1. Make sure of the following:
❏
Your software settings keep the printing entirely within the printable area. For information
about the printable area, see “Printable area” on page 134.
!
Caution:
Printing on the edge of a label can damage the print head.
❏
The auto tear off function is turned off in the printer settings.
❏
If you use labels whose backing sheet is exposed, make sure the head gap is not set to
AUTO
.
Set it to the appropriate position. See “Adjusting the Head Gap” on page 35 for more
information.
2. Load labels as described in “Loading continuous paper with the tractor” on page 38.
To tear off and eject labels
Always tear off and eject labels as described below.
!
Caution:
Never feed labels backward using the
Load/Eject
button,
OK
button, or knob on the right side of
the printer. Labels can easily peel off their backing and jam the printer.
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling
48
Содержание DLQ-3500II
Страница 1: ...User s Guide NPD6247 01 EN ...
