Epson DLQ-3500II, Руководство пользователя

Страница: 120 / 147

!
Caution:
Make sure the printer is turned off before connecting the cable.
Note:
To remove the automatic sheet alignment unit, turn off the printer and follow the installing procedure in
reverse from the last step.
Loading paper using the automatic sheet alignment unit
Follow these steps to load paper using the automatic sheet alignment unit:
1. Make sure that Manual/CSF is selected as the paper source on the home screen. If not, select it by
pressing the Paper Source button.
2. Set the head gap to the appropriate position for the type of single sheet you are using referring to
the table in “Adjusting the Head Gap” on page 35. Normally set it to AUTO .
3. Insert paper into the automatic sheet alignment unit so that the tip of the paper goes behind the
rollers of the unit. The printer automatically aligns the paper, recognizes the right and left edges
(the width) of the paper and starts feeding.
1. inserted position
2. aligned position
3. arrow marks
Note:
❏
Make sure to insert paper between the two arrow marks on the unit.
❏
The paper may not be fed or ejected correctly if it is loaded at too large an angle. Reload the paper
at a smaller angle.
DLQ-3500II/DLQ-3500IIN User’s Guide
Options and Consumables 120