Epson Disc producer PP-100N Security Скачать руководство пользователя страница 29

Страница: 29 / 153

Preparation

•

When using for the first time, the product operates to prepare the internal components

of the product (loading ink).

•

While ink is being loaded (approximately 5 minutes), do not turn off the power or open

the ink cartridge cover. These actions would make it necessary to perform the loading

ink operation again, resulting in the consumption of a substantial amount of ink. Also,

printing may be unable to be performed properly.

•

In the initial loading ink operation immediately after purchase, the ink is filled up to the

tip sections of the print head nozzles (ink discharge holes) to enable printing, and so ink

equivalent to this amount is consumed. As a result, the quantity that can be printed is

higher when the ink cartridges are installed from the second time.

•

If the ink cartridges are not recognized even though they are installed correctly, dust or

another object may be adhering to the green chip surface. Use a soft cloth to wipe off

the object, and then reinstall the cartridge.

•

If printing cannot be performed properly even though the ink cartridges are installed,

perform head cleaning. See “Head cleaning” in the

PP-100N Security User’s Guide

for

details on the head cleaning procedure.

•

When the power is turned off using the power button on the main unit, the print head is

automatically capped to prevent drying of the ink. After the ink cartridge is installed,

be sure to use the power button on the main unit to turn off the power whenever the

product is not used. Do not disconnect the power plug or shut off the circuit breaker

while the power is still on.

•

If moving or transporting the product after the ink cartridges are installed, leave them

installed during the moving or transporting process.

•

The ink cartridges should only be removed when replacing them.

When the ink cartridges are installed for the first time (during setup), ink is consumed for

filling (loading ink), and so the ink cartridge will need to be replaced earlier than normal.

Notes

Содержание Disc producer PP-100N Security


























































































































































Результаты поиска

Содержание Disc producer PP-100N Security

Отзывы:

Похожие инструкции для Disc producer PP-100N Security

Бренды по названию

Популярные бренды

Epson Disc producer PP-100N Security, Руководство администратора

Результаты поиска

Содержание Disc producer PP-100N Security

Отзывы:

Похожие инструкции для Disc producer PP-100N Security

Бренды по названию

Популярные бренды