Epson Disc producer PP-100N Security Скачать руководство пользователя страница 127

Страница: 127 / 153

127

Troubleshooting

Disc writing problems

Symptom/Problem

Status

Check/Remedy Procedure

A writing error has

occurred.

Is the disc scratched or dirty?

Scratched or dirty discs cannot be used. Replace with another disc.

The quality of the data recording surface may vary depending on the disc.

Replace with another disc and try again.

Is there dust adhering to the filter of the product rear fan?

Clean the filter.

See “Cleaning the air vents” in the

PP-100N Security User’s Guide

for details.

Unable to write to disc/

Unable to read disc

Is the disc being handled correctly?

•

Handle the disc correctly by following the disc user’s guide.

•

Do not affix adhesive stickers to the disc. This may make recording and

playback of data no longer possible.

•

Do not use this product in locations with large amounts of dust or smoke.

This can cause drive writing errors.

See “Handling discs” in the

PP-100N Security User’s Guide

for details on disc

handling.

Was the cover opened or the product jolted during publishing?

Do not subject the product to jolts or impacts during disc publishing. The

drive may malfunction, or the disc may become unusable.

Also, do not open the cover during publishing. This could adversely affect the

printing and writing quality of the disc. Pause the job and then open the

cover. See “Pausing jobs” on page 73 in this guide for the procedure for

pausing jobs.

Is your computer compatible with the operating environment of this product?

Use and connect this product to a computer compatible with the operating

environment.

See “Before installation” in the

PP-100N Security User’s Guide

When copying a disc from the drive, are you logged on with a “computer

administrator” account (user with administrator privileges)?

If you do not log on with a “computer administrator” account, disc copying

from the drive cannot be performed.

Log on to Windows with a computer administrator account, and perform

disc copying from the drive.

Is the printer tray dirty?

Clean the printer tray.

See “Disc recording surface is stained with ink” on page 143 in this guide for

the printer tray cleaning procedure.

If you set [Write Verification] to [Compare] when publishing discs in EPSON Total Disc

Maker, you can check whether data was written to the discs correctly. See the Help file for

EPSON Total Disc Maker for details.

Notes

Содержание Disc producer PP-100N Security


























































































































































Результаты поиска

Содержание Disc producer PP-100N Security

Отзывы:

Похожие инструкции для Disc producer PP-100N Security

Бренды по названию

Популярные бренды

Epson Disc producer PP-100N Security, Руководство администратора

Результаты поиска

Содержание Disc producer PP-100N Security

Отзывы:

Похожие инструкции для Disc producer PP-100N Security

Бренды по названию

Популярные бренды