6.
Adjust the edge guides, and then place the original in the ADF.
Scanning starts automatically.
7.
After scanning ends, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
Note:
If you want to scan originals that are detected as double feeds, such as plastic cards and envelopes, enable
DFDS
Function
to skip double feed detection.
To scan originals that are likely to jam, such as thin paper, enable
Slow
to slow down the feeding speed.
8.
After you have scanned all originals, exit Automatic Feeding Mode.
Select the
Save and Finish
on the scanner control panel, or click
Finish
on the
Automatic Feeding Mode
window displayed on your computer.
The scanned image is saved to the folder you specified.
Related Information
&
“Placing Originals” on page 45
>
Scanning with Manual Feed in Automatic Feeding Mode
107