8
Login Password
Enter the password corresponding to the above login name.
Note:
Empty password is not valid in the Scan to Server/Computer feature. Ensure
that you have a valid password for the user login account. (See “Confirming a
Login name and Password” on page 141 for details on how to add a password in
your user login account).
9
Confirm Login Password
Re-enter your password.
10
Port Number
Enter the port number. If you are unsure, you can enter the default value of 139
for SMB and 21 for FTP.
After you configured settings, go to “Sending the Scanned File to the Network” on page 162.
Sending the Scanned File to the Network
1. Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass.
See Also:
❏
“Making Copies From the ADF (Epson AcuLaser MX14NF Only)” on page 118
❏
“Making Copies From the Document Glass” on page 116
2. Press the (
Scan
) button.
3. Select
Scan to Network
, and then press the
button.
4. Select
Scan to
, and then press the
button.
5. Select
Computer(Net)
or
Server(FTP)
, or
Search Address Book
, and then press the
button.
Computer(Net)
: Stores the scanned image on the computer by using the SMB protocol.
Server(FTP)
: Stores the scanned image on the server by using the FTP protocol.
Search Address Book
: Select the server address registered in Address Book.
6. Select the destination to store the scanned file in, and then press the
button.
7. Select scanning options as required.
Epson AcuLaser MX14 Series User’s Guide
Scanning
162
