3. Customize the copy settings including the number of copies, copy size, and image quality.
See Also:
“Setting Copy Options” on page 119
To clear the settings, use the (
Clear All
) button.
4. Press the
(
Start
) button to begin copying.
Note:
Press the (
Stop
) button to cancel a copy job at any time while scanning a document.
Setting Copy Options
Set the following options for the current copy job before pressing the
(
Start
) button to make
copies.
Note:
After a copy job is completed, the copy options would be kept until the screen returns to
Select
Function
(auto-reset or the
(
Back
) button is pressed), the (
Clear All
) button is pressed, or the
(
Copy
) button is pressed again.
Number of Copies
You can specify the number of copies from 1 to 99.
1. For the Epson AcuLaser MX14NF, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document cover.
For the Epson AcuLaser MX14, place a single document face down on the document glass, and
close the document cover.
See Also:
❏
“Making Copies From the ADF (Epson AcuLaser MX14NF Only)” on page 118
❏
“Making Copies From the Document Glass” on page 116
2. Press the (
Copy
) button.
3. Enter the number of copies using the numeric keypad.
Epson AcuLaser MX14 Series User’s Guide
Copying
119
