Epson Aculaser M1200 series, Руководство пользователя

Страница: 97 / 139

Clearing Jammed Paper
When paper is jammed in the printer, the EPSON Status Monitor 3 provides alert messages.
Precautions for clearing jammed paper
Be sure to observe the following points when you clear jammed paper:
❏
Do not remove jammed paper by force. Torn paper can be difficult to remove and might cause
other paper jams. Pull it gently in order to avoid tearing.
❏
Always try to remove jammed paper with both hands to avoid tearing it.
❏
If jammed paper is torn and remains in the printer, or if paper is jammed in a place not
mentioned in this section, contact a qualified service representative.
w
Warning:
Be careful not to touch the fuser, which is marked CAUTION Hot Surface , or the surrounding
areas. If the printer has been in use, the fuser and the surrounding areas may be very hot.
Preventing paper feed and paper jam problems
If you have frequent paper feed or paper jam problems, use this checklist of corrective measures:
❏
Fan the stack of paper and then tap its edges to align it before you load it.
❏
Be sure that you do not load too much paper into the tray.
❏
Be sure to adjust the paper guides so that paper feeds freely.
❏
Never allow more than 100 sheets to accumulate on the face-down tray.
❏
Try turning over the stack of paper in the paper tray. Most paper packages indicate the top side
of the paper with an arrow at the side of the package.
❏
Be sure that you do not add paper while printing.
Paper jam — inside the printer
If paper is jammed inside the printer, remove the sheet as follows:
EPSON AcuLaser M1200 Series User’s Guide
Troubleshooting 97