Epson Aculaser M1200 series, Руководство пользователя

Страница: 69 / 139

Chapter 6
Replacing Consumable Products
Precautions During Replacement
Always observe the following handling precautions when replacing consumable products:
❏
Provide enough space for the replacement procedure. You will have to open some parts (such
as the printer cover) of the printer when you are replacing consumables.
❏
Do not install used consumable products into the printer.
w
Warning:
❏
Be careful not to touch the fuser, which is marked CAUTION Hot Surface , or the
surrounding areas. If the printer has been in use, the fuser and surrounding areas may be
very hot.
❏
Do not dispose of used consumable products in fire, as they may explode and cause injury.
Dispose of them according to local regulations.
Developer Cartridge
You need to replace the developer cartridge when a notice message is displayed on the window of
the EPSON Status Monitor 3.
When the Toner light is on and the Error light is flashing slowly on the EPL-6200 or the Ready
light is on and the Error light is flashing on the AcuLaser M1200/EPL-6200L, the printer has run
out of toner. If the indicator lights light up in this manner, or if a message is displayed on the
EPSON Status Monitor 3 screen, replace the developer cartridge.
Always observe the following handling precautions when replacing developer cartridges:
❏
Installing a genuine consumable product is recommended. Using a non-genuine consumable
product may affect print quality. Epson shall not be liable for any damages or problems arising
from the use of consumable products not manufactured or approved by Epson.
❏
When handling developer cartridges, always place them on a clean, smooth surface.
EPSON AcuLaser M1200 Series User’s Guide
Replacing Consumable Products 69