Epson Aculaser M1200 series, Руководство пользователя

Страница: 108 / 139

Non-printed side of the page is dirty
Cause What to do
Toner may have spilled onto the paper feed path. Turn off the printer. Clean internal printer components.
White spots, black dots, or black horizontal lines appear in a cyclic manner in the printout
Cause What to do
There may be a problem with the photoconductor unit. Turn off the printer. Remove the unit, and reinstall it. If
this does not solve the problem, replace the
photoconductor unit as described under
“Photoconductor Unit” on page 74.
Memory Problems
Note
The resolution to some memory problems may suggest that you increase the memory of the printer.
Note that only the EPL-6200 allows you to increase the memory by installing a memory module.
Print quality decreased
Cause What to do
The printer cannot print at the required quality level
because of insufficient memory, and the print quality
was automatically lowered so that the printer can
continue printing. Check to see if the printout is acceptable. If not, add
more memory for a permanent solution or temporarily
lower the
Print Quality setting in the printer driver.
Insufficient memory for current task
Cause What to do
The printer does not have sufficient memory for the
current task. Add more memory for a permanent solution or
temporarily lower the
Print Quality setting in the printer
driver.
EPSON AcuLaser M1200 Series User’s Guide
Troubleshooting 108