Epson AcuLaser C2000, Руководство администратора

Страница: 185 / 272

9
EpsonNet WinAssist/MacAssist/WebAssist
9-35
ESCP2 and FX Emulation
Items Explanations
Emulation Select ESCP2 or FX.
Font Select a font which is used for printing.
Pitch Select a character pitch.
Condensed Use this option to change the character
spacing.
T. Margin Use this option to specify the distance from
the top of the sheet to the baseline of the
first printable line.
Text Use this option to set the page length in
lines.
CG Table Use the character generator table option
to select the graphics character table, or
the italics table.
Country Use this option to select one of the
international symbol sets.
Auto CR Use the automatic carriage return option
to perform a carriage-return line-feed (CR-
LF) operation whenever the print position
exceeds the right margin.
Auto LF When you set AutoLF to Off, the printer
does not send an automatic line feed (LF)
command with each carriage return (CR).
When on, the printer adds a line feed to
each carriage return it receives.
Bit Image With Bit Image set to Dark or light, your
printer can correctly emulate the graphics
densities set with the printer command.
When you select Dark, the bit image
density is high. When you select Light, the
bit image density is low.
Zero Char Select whether the printer prints a slashed
zero or an unslashed zero.
Set button Saves any changes.
Reload button Clears any changes and reloads the
previous settings.