Problem
Action
The printed result has ghosting.
Adjust the transfer bias.
1. Launch the Printer Setting Utility, and click
Chart Print
on the
Diagnosis
tab.
2. Click the
Ghost Configuration Chart
button.
The Ghost Configuration Chart is printed.
3. Click
BTR Refresh Mode
on the
Printer Maintenance
tab.
4. Select the check box next to
On
, and then click the
Apply New Settings
button.
5. Click
Chart Print
on the
Diagnosis
tab.
6. Click the
Ghost Configuration Chart
button.
The Ghost Configuration Chart is printed.
The print media surface may be uneven. Try changing the
Paper Type
setting in the
print driver. For example, change Plain to Lightweight Cardstock.
1. On the
Paper / Output
tab in
Printing Preferences
of the print driver, change
the
Paper Type
setting.
Adjust the temperature of the fusing unit.
1. Launch the Printer Setting Utility, and click
Adjust Fusing Unit
on the
Printer
Maintenance
tab.
2. Adjust the fixing temperature by turning up the value for your printing media.
3. Click the
Apply New Settings
button.
If you use non-recommended print media, use the print media recommended for
the printer.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Fog
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting
169
