Problem
Action
The printed result has vertical blanks.
Clean inside the printer and perform test print.
1. Clean inside the printer by using the print head cleaning rod.
2. Click
Print Test Page
in the Properties window of the print driver.
See also:
“Cleaning Inside the Printer” on page 196
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Mottle
Problem
Action
The printed result has mottled
appearance.
Adjust the transfer bias.
1. Launch the Printer Setting Utility, click
Adjust BTR
on the
Printer Maintenance
tab.
2. Adjust the setting for the type of print media being used.
3. Click the
Apply New Settings
button.
If you use non-recommended print media, use the print media recommended for
the printer.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Ghosting
Epson AcuLaser C1750 Series User’s Guide
Troubleshooting
168
