Replacing the Cover
When you are ready to replace the computer’s cover, refer to the
illustrations above and follow these steps:
1.
2.
3.
4.
5.
6.
Make sure all the internal components are installed properly.
Check all cable connections, especially those that might have
been loosened during your work.
Make sure all cables are out of the way so they do not catch
on the cover.
For the slimline computer, insert the lip at the front of the
cover between the front bezel and the computer case and
guide the cover straight down.
For the tower computer, squeeze the sides in and slide the
cover forward until the lip at the front of the cover slides
between the front bezel and the computer case.
Replace the retaining screws.
Reconnect the computer to the monitor, printer, keyboard,
mouse, and any other peripheral devices you have. Then
reconnect the power cable to the back of the computer and to
an electrical outlet.
Installing
and Removing Options 3-5
