Epson ActionPC 6000, Руководство пользователя

Страница: 38 / 144

Note
Some hard disk drives do not support a low-power standby
mode. Also, the delay caused by the hard disk drive
returning to active mode may cause errors in some
applications. If you have problems, you may want to disable
t h e F i x e d D i s k T i m e o u t o p t i o n .
Exiting SETUP
When you leave SETUP, you can save your settings, or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
To leave SETUP, press E
SC
from any SETUP screen. From the
SETUP Main Menu, you can perform the following functions:
Load ROM Loads the factory default settings
D e f a u l t V a l u e s stored in ROM back into CMOS.
If you change your system
configuration using the SETUP
program and then have problems,
you can load ROM values to boot
the system and start over.
L o a d V a l u e s Loads the current values stored in
from CMOS CMOS for all SETUP options. This
ignores any changes you have
made through SETUP.
S a v e V a l u e s t o
Saves the changes you have made
CMOS
to your configuration to CMOS.
Press E
SC
to exit SETUP and restart your computer.
2-14 Running SETUP and Installing Drivers