Epson ActionPC 5500, Руководство пользователя

Страница: 37 / 147

Setting Options for Peripheral Controllers
When you select the Peripheral Setup icon from the
Setup window, you see the Peripheral Setup window. Use this
window to configure the computer’s integrated peripheral
devices (such as the parallel and serial ports) and controllers.
To avoid possible configuration problems, it is a good idea to
leave these options at their default settings.
The following table describes the Peripheral options.
Peripheral options
Option Settings
Description
Programming Auto * Automatically sets or allows you to set
Mode Manual the next four options; if you select
Manual, you can choose your own
settings for the diskette drive controller,
serial ports, and parallel port
OnBoard FDC Enabled * Enables or disables the built-in diskette
Disabled drive controller
Serial Port 1 Disabled
Assigns the address for serial port 1;
3F8H * select Disabled to disable the port
3E8H
2E8H
Serial Port2 Disabled
Assigns the address for serial port 2;
2F8H *
select
Disabled
to disable the port
3E8H
2E8H
Parallel Port Disabled
Assigns the address for the built-in
3BCH
parallel port; Select Disabled to
378H *
disable the port
278H
OnBoard PCI Enabled *
Enables or disables the IDE controller on
IDE Disabled
the system board
Running SETUP and Installing Drivers 2-11