manualshive.com logo in svg

Epson ActionPC 2600, Руководство пользователя

Поделиться
Скачать
Epson ActionPC 2600 Скачать руководство пользователя страница 20

To connect the mouse, insert the connector into the
computer’s built-in mouse port so the arrow or mark on
the connector faces up. The icon for the mouse is shown
at the left.

Caution

Although the connectors and ports for the mouse and
keyboard are physically identical, they cannot be used
interchangeably. Be sure to plug the connectors into the
appropriate ports, or you may damage your system.

Your mouse drivers for Windows applications have been
installed for you. If you need to install other mouse drivers, see
your mouse manual for instructions.

Connecting a Monitor

Refer to the illustration on page 1-3 as you connect your VGA
or SVGA monitor to the computer’s built-in monitor port.

Follow these steps to connect your monitor:

1. Place your monitor near the computer. Turn the monitor

and computer around so the backs are facing you.

2. 

There should be two cables provided with your monitor: the

monitor cable (to connect it to the computer) and the power

cable (to connect it to a power source). On most monitors,
the monitor cable is permanently attached to the monitor. If
your monitor does not have an attached cable, connect the
cable to it now.

1-4

Setting Up Your System

Содержание ActionPC 2600




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды