Epson ActionLaser 1300, Руководство по обслуживанию

Страница: 30 / 106

General Description
1.4.4
Printer Sharing
section describes printer sharing- It is possible to each mode to parallel and optional
interfaces. The entire
memory be allocated to that are used. The interface that
receives the data first will print first.
Mode Assignment
HP mode
User 1
Parallel
AWPS mode
Input buffer
*
mode
Memory
Mode Assignment
User 2
AUX
I I
Figure 1-10. Auto Sense Mode
Input
The input buffer size is automatically adjustable from a minimum of 1/1000 of all memory to a
maximum of 1/5 of
memory. If the input buffer is this printer expands the input buffer by
1/1000 of memory per one step.
When the user the host computers interface and optional interface, the input
buffer size for the interface not processing data is a maximum 1/100 of all memory.
Note:
While Level 2 is used, this printer sets the input buffer.
1.4.5 Emulation Mode Switch Function
This section describes the emulation mode switch function.
1.4.5.1 Emulation Switch by
The two types of emulation switch functions described below are available on this printer.
Together they are referred to as
(Shared Printer Language).
EPSON Job
This is EPSON’s original language system. It is to among various destinations, as shown
in Figure 1-11.
Printer Job
This is HP’s original language, which is available with the LaserJet III Si printer.
It is able to skip among various destinations, as shown in Figure 1-11. The precise specifications for
this language are based on the HP LaserJet III Si.
The figure below shows three types of mode switching.
Neither nor switches the mode directly. They exit current mode and return to
or Then they enter another mode.
1
PCL5e
I
Figure 1-11. Emulation Switch by
1-20
Rev.