Epson Stylus PRO 7000 Скачать руководство пользователя страница 101

Страница: 101 / 182

Paper Handling

4-17

5. Pull the paper set lever all the way up.

appears on the LCD panel.

6. Press the

Pause

button.

The print heads move and the sheet automatically feeds into
the printing position.

appears on the LCD panel.

Note:

Even if you do not press the

Pause

button, the print heads move,

the paper automatically feeds into the printing position.

appears on the LCD panel.

7. Make the printer driver settings (see “Accessing the Printer

Software” on page 2-2), then send a print job from the
computer. The printer starts printing.

Note:

Make sure that the Paper Source setting in the printer driver
matches the paper loaded in the printer.

8. When printing is complete, the printer supports the printed

media, and

is displayed on the LCD panel. To

remove the paper, hold it while pressing the

Paper Feed

button. The paper can be removed from the printer.

Содержание PRO 7000























































































































































































Результаты поиска

Содержание PRO 7000

Отзывы:

Бренды по названию

Популярные бренды

Epson Stylus PRO 7000, Справочное руководство

Результаты поиска

Содержание PRO 7000

Отзывы:

Бренды по названию

Популярные бренды