ePropulsion SPIRIT 1.0 Evo, Руководство пользователя

Страница: 39 / 64

37
6.4 Use of Safety Wristband
6.4.1 Pairing Safety Wristband with Evo Control System
Press th e “
^
” and “ ” buttons and hold for a while to display the safety wristband
icon and “SE”. At this time, approach the safety wristband that needs to be paired,
turn on the safety wristband, and the Evo control system displays the “SUC”, indicat -
ing successfully pairing. Keep in this interface and continue to press “ ” to pair the
safety wristband continuously (the maximum number of pairs is 8). After completing
the pairing, press the “ ” button to return to the main page.
Figure 6-8
6.4.2 Man Overboard Protection
After the safety wristband and the Evo control system are paired, when the safety
wristband falls into the water and the Evo control system is on, the Evo control sys-
tem display will flash with a buzzing sound. The safety wristband icon flashes and
the number of safety wristbands decreases. At this time, you can continue to operate
the machine by returning the throttle to zero position. The buzzer of the Evo control
system will stop, but the display continues to flash. If you confirm that you need to
cancel the alarm state, please restart the Evo control system or the disconnected
wristband.
6.4.3 Emergency Stop
After the safety wristband and the Evo control system are paired, when the Evo con-
trol system is in operation, short press the button of the safety wristband, the dis-
play of the Evo control system will flash with a buzzer. At the same time, the safety
wristband icon flashes and the number of safety wristbands displayed at the bottom
decreases. At this time, you can continue to operate the machine by returning the
throttle to zero position. The buzzer of the Evo control system stops, but the display
continues to flash. If you confirm that you need to cancel the alarm state, please re -
start the Evo control system or short press the safety wristband after 5 seconds.