ePropulsion SPIRIT 1.0 Evo, Руководство пользователя

Страница: 17 / 64

15
3 Installation
Step1: Hang the motor on the transom and tighten the two clamp handles.
Transom Thickness
Range: 28mm~63mm
LOCK
Figure 3-1 Figure 3-2
After tightening the clamp handles fully, the users can also use two screws to fix the
outboard to the boat. The dimensions of the two mounting holes are shown below.
Figure 3-3
Never use screws to fix the outboard when the clamp handles are not fully tight -
ened.
Ensure the outboard is firmly fixed as loosened clamp screws may cause the
outboard to fall into water or get damaged. Check the screws or clamps every
time before use since they may be loosened because of mechanical vibrations.
136.7 mm
6 mm
R4.25 mm