ePropulsion SPIRIT 1.0 Evo, Руководство пользователя

Страница: 21 / 64

19
4 Connecting a 48V Battery
When using a 48V battery, make sure the power switch is off before connection.
1. First connect the external battery cable to the battery.
2. Connect the external battery cable with the power cables from the outboard.
3. If using ePropulsion battery (not SPIRIT Battery), connect the battery to the
outboard with a communication cable.
48V
+ -
Main
switch
2
1
Figure 4-1
Avoid battery short-circuit during connection.
Do not short-circuit the main switch with other power supplies. The main switch
should be mounted on the boat, and the back plate of the main switch should
not be removed.
Outboard motor will stop working once the power cable disconnects.
Counterclockwisely turn the reset button on the power switch until it is stuck to
power on the battery before use.
Users can also enlarge the battery capacity by connecting multiple batteries in
parallel.
During use, if a poor contact is found, it is recommended to check the tightening
of each terminal connection.